Twin Disc Southeast - Twin Disc, Arneson, ITT Jabsco, Federal Mogul. Arneson Surface Drives

Marine Transmissions
Power Take Offs
Fluid Couplings
Arneson Drives
Torque Converters
Power Commander
Water Jets

Application Worksheet Arneson Specifications Arneson Pricing	We recommend direct communications with Twin Disc Southeast to address your Arneson^Ž interests, but offer this on-line information for convenient general purposes.
Correct SDS unit selection is determined by engine horsepower, rpm's reduction ration, ASD input torque, vessel type and use, and propeller type and size. These specifications are intended only as a general guide. Consult Twin Disc Southeast for specific applications. Twin Disc Southeast and Twin Disc reserve the right to change unit specifications and prices without notice or obligation.

Current Model Specifications ASD 6 ASD 8 ASD 10 ASD 12 ASD 14 ASD 16 ASD 18

InLine Yes Yes Yes Yes Yes Yes Yes

Drop-Center Yes Yes Yes No No No No

Horsepower
Acceptance Gasoline
@5200 rpm To 550 To 990 To 1485 Contact Twin Disc Southeast

Diesel
@2400 rpm To 290 To 5,000 (Subject To Application)

Gas
Turbine To 10,000 (Subject To Application)

Nominal Shaft Size (Inches) 1.75 2.00 2.50 3.0 3.50 4.50 6.50

Unit Weight (Pounds, dry, includes ASD unit, trim & steering cylinders, trim pump, reservoir, mounting hardware, and hoses In-Line A 134
B197 B 285 B 417 B 775 B 1135 A 1985
B 2625 A 3900
B 5000

Drop Center A 159
B 230 10"-C458
10"-B610
16"-C485
16"-B680 10"-C560
10"-B750
16"-C600
16"-B820 - - - -

Overall External Length(Inches) In-Line 36 42 50 64 1/2 71 86 114

Drop Center 39 54 63 - - - -

Turning Angle (Total) 40° 40° 40° 40° 40° 36° 36°

Propeller Trim Control
(Vertical Travel) 15° 15° 15° 15° 15° 15° 15°

Note: Some boats may require transom mounting wedges. Please consult Twin Disc Southeast. Metric conversion factors: HP x 0.746 = KW; KW x 1.341 = HP. Arneson^Ž Surface Drive materials: (A) ALMAG 35/ALMAG 35/aluminum alloy in-line unit or drop-center; (B) Bronze in in-line or drop-center; (C) ALMAG35/aluminum alloy drop-center housing/bronze thrust assembly.

Marine Transmissions | Power Take Offs |Fluid Couplings
Arneson Drives | Torque Converters | Power Commander | Water Jets

Export | Domestic | Company Info | News and Info | Home Page
Twin Disc | ITT Jabsco | Federal Mogul

Current Model Specifications		ASD 6	ASD 8	ASD 10	ASD 12	ASD 14	ASD 16	ASD 18
InLine		Yes	Yes	Yes	Yes	Yes	Yes	Yes
Drop-Center		Yes	Yes	Yes	No	No	No	No
Horsepower Acceptance	Gasoline @5200 rpm	To 550	To 990	To 1485	Contact Twin Disc Southeast
	Diesel @2400 rpm	To 290	To 5,000 (Subject To Application)
	Gas Turbine	To 10,000 (Subject To Application)
Nominal Shaft Size (Inches)		1.75	2.00	2.50	3.0	3.50	4.50	6.50
Unit Weight (Pounds, dry, includes ASD unit, trim & steering cylinders, trim pump, reservoir, mounting hardware, and hoses	In-Line	A 134 B197	B 285	B 417	B 775	B 1135	A 1985 B 2625	A 3900 B 5000
	Drop Center	A 159 B 230	10"-C458 10"-B610 16"-C485 16"-B680	10"-C560 10"-B750 16"-C600 16"-B820	-	-	-	-
Overall External Length(Inches)	In-Line	36	42	50	64 1/2	71	86	114
Overall External Length(Inches)	Drop Center	39	54	63	-	-	-	-
Turning Angle (Total)		40°	40°	40°	40°	40°	36°	36°
Propeller Trim Control (Vertical Travel)		15°	15°	15°	15°	15°	15°	15°